Descripción General

DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator (regenerative braking, Euro 5 and Euro 6 engines) The Buck-Boost DC-DC Converter is a DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator. The converter will charge the auxiliary battery with a pre-set charge voltage, eliminating high voltages (e.g. Mercedes: 15,4V) and low voltages. ‘Engine running’ detection system Deep discharge of the vehicle's starting battery is avoided by a built-in ‘engine running’ detection system. Instead of this detection system, the converter can also be activated by means of a programmable input (D+, CAN bus or (+)15 connection). Fully programmable The converter can be fully programmed by means of a simple and user-friendly PC application. (USB type A male to USB type B male cable needed) One product for 12V, 24V and 12/24V systems The converter can be programmed to charge a 12V or a 24V auxiliary battery from either a 12V or a 24V alternator and starter battery. Charge current and input current limiter The output current is determined by the following factors: - The maximum charge current setting. - The maximum input current setting. - The maximum operating temperature limit of the converter

Características Destacadas

• Caraterística: DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator
• Caraterística: (regenerative braking, Euro 5 and Euro 6 engines)
• Caraterística: The Buck-Boost DC-DC Converter is a DC-DC Converter for charging a 12V or 24V service battery in
• Caraterística: vehicles with a smart alternator. The converter will charge the auxiliary battery with a pre-set charge
• voltage, eliminating high voltages (e.g. Mercedes: 15,4V) and low voltages.
• Caraterística: ‘Engine running’ detection system